Roll-up General Bottom There is a reel, there is spring, not when the advertising screen roll back inside. When you need to use the cloth to pull out, with a stick behind the support can be used. When you need to use roll-up, you can follow these steps:
A. Turn the "roll-up" foot to around 90 degrees and place it downward.
B. The "roll-up" Huazhou primer on the sticky paper, the good picture on the paste, both ends aligned to the straight, so that the flat paste up.
C. The plastic cover at one end of the hanging drawing strip is opened, the middle hard plastic core strip is extracted, (with a centimeter wide double-sided adhesive will stick the hard plastic core strip to the upper edge of the screen back), and then put back into the metal tube, cover the plastic cover.
D. Press the bottom end, hold the drawing bar with the hand, pull out the "roll-up" end of the ring bolt, the picture slowly into the "roll-up" (note: must first hold the picture and picture, and then pull the pin).
E. When used, will be placed in the "roll-up banner" of the 30 percent metal rod out of the connection, metal rod at one end inserted in the "roll-up" triangle plastic openings, and then the picture slowly out, the hook hanging the picture bar, hook at the top of the metal connecting rod can be.
F. If you need to change the screen, pull the picture out, plug in the original fixed hole, fixed the screen, and then repeat steps a to D operation process can be. 80cmx200cm roll-up Screen Size: 79x200cm (note: The top of the screen size white edge 1cm, the bottom left 2cm)
Related Industry Knowledge
- How to carry a tent
- How to clean the tent
- Some questions about the tent
- What is roll-up
- Development history of Roll up bann...
- Development status of roll up banne...
- Introduction to the features of Rol...
- Introduction of the vehicle flag
- The material and technology of the ...
- Roll up Banner Stands use
- What is beach flags?
- What are tents?
- What are table covers?